SMOK MORPH 2 230W Kit - Product Description
The SMOK MORPH 2 Kit includes the SMOK MORPH 2 230W box mod and the all new SMOK TFV18 Tank. The Morph 2 is powered by dual 18650 batteries (not included) with max of 230W and is equipped with 0.96 inch OLED screen displaying useful data. The all new SMOK IQ-S proprietary chipset provides up to 230 Watts of power and four different firing modes to fine tune flavor and vapor deliver-ability all while delivering a 0.001s firing speed. Included in the kit is the SMOK TFV18 Sub Ohm Tank which features a wide-bore resin drip tip, 7.5ml capacity and a Press-to-slide top filling design.
SMOK MORPH 3 230W Kit – colorful designs to suit your tastes
Like any other vape, you will carry SMOK MORPH 3 230W Kit with you almost at all times. But would you like to look at something ugly several times a day? Probably not, thus this vaping device comes with great design and in various colors. From silver, through red and black to colorful gradients – you may choose your favorite option and enjoy looking at your SMOK MORPH 3 230W Kit every time you pull it out of your pocket.
Boost your vaping experience with SMOK MORPH 3 230W Kit
Do you want to have full control over your smoking experience, without changing your e-liquids constantly? SMOK MORPH 3 230W Kit offers you this. With its high output range, it will let you experience new vaping sensations without changing the liquids, while leaving you in charge of its power.
Quick Links:
SMOK TFV18 Replacement Coils
SMOK MORPH 2 Box Mod Features:
- Dimensions – 88mm by 47.5mm by 31.7mm
- IQ-S Chipset
- Powered by (2) High-Amp 18650 Batteries (Sold Separately)
- Wattage Output Range: 1-230W
- Voltage Output Range: 1.2-8.2V
- Resistance Range – VW Mode: 0.1-2.5ohm
- Resistance Range – TC Mode: 0.05-2.0ohm
- Temperature Range: 200°F-600°F
- Nickel, Titanium, and Stainless Steel Wire Compatibility
- Firing Speed: 0.001s
- Zinc-Alloy Chassis Construction
- Intuitive Firing Button
- 0.96″ OLED Display Screen
- Two Adjustment Buttons
- 8s Cut-Off Protection
- Atomizer Detection
- Over-Heating Protection
- Short Circuit Protection
- Low Battery Warning
- Reverse Polarity
- Over-Discharge Protection
- USB Type-C Port – Rapid Charging
SMOK TFV18 Sub Ohm Tank Features:
- 32mm Diameter
- 7.5mL Bulb Glass Capacity
- Pyrex Glass Reinforcement
- Superior Stainless Steel Construction
- Top Fill System – Press and Slide
- High-Temperature Resistant
- SMOK TFV18 Coil Series
- 0.33Ω Mesh Coils – Rated for 100-110W
- 0.15Ω Dual Mesh Coils – Rated for 100-110W
- Plug ‘n’ Play Coil Installation
- Dual Slotted Bottom Airflow Control Ring
- Threaded 510 Connection
What’s Included:
- 1-Qty Morph 2 Box Mod
- 1-Qty TFV18 Tank
- 1-Qty TFV18 0.15Ω Dual Meshed Coil
- 1-Qty TFV18 0.33Ω Meshed Coil
- 1-Qty Extra Glass Tank
- 1-Qty USB Type-C Cable
- 1-Qty User Manual
General Tips
- Only use Sony VTC Batteries, Samsung or LG Batteries with your Box Mod. We will not be held responsible for improper use of the mod or any damages that may occur from using this box mod.
- Always use the same brand and model batteries in the mod. For Example use (2) Sony VTC5 18650 batteries or (2) Efest Purple 35A 18650 batteries. DO NOT mix the batteries in your mod. For Example DO NOT use (1) Sony VTC5 18650 Battery and (1) Efest Purple 35 18650 Battery, damage may occur.
- The batteries used in your mod MUST have the same level of charge, be the same brand and should be batteries that were purchased together WITHOUT prior and charged together. Failing to follow these steps could result in serious damage to your mod and could cause serious personal injury.
- Always Use Protected Batteries from Reputable Brands Such as Sony, LG or Samsung. Failure to Use These Batteries Can Result in Explosion and/ or Severe Incorrect Fitment.